Concrete Strength Test for Reinforcement of Building Engineering

Xiuying Wei, Wen Li, Tongwen Zhang

Ekoloji, 2019, Issue 108, Pages: 1361-1365

OPEN ACCESS

Download Full Text (PDF)

Abstract

In the actual project, the non-destructive testing technology of concrete components has been widely used. In order to further ensure the quality of concrete, the rebound strength method is used to analyze the concrete strength test used for building engineering reinforcement. The basic principle of rebound test is analyzed, and the rebound value is tested according to the basic principle. On the basis of this, the concrete tensile strength test is completed according to the calculation result of the sound velocity value in concrete. The experimental results show that the proposed method has a good fitting degree with the actual test value, which indicates that the proposed method has better performance and provides data support for more accurate testing of the strength of high-strength concrete members on site.

Keywords

building, concrete, tensile strength, test, rebound method

References

  • Ding SR, Huo YH (2017) Strength Test and Simulation of Seismic Strengthening of Concrete Structures. Computer Simulation, 34(8):429-432.
  • Ding W, Chen X, Xu LY (2018) Detection and Analysis of concrete cracks in High strength concrete-Steel Plate Composite Shear Wall. Architecture Technology, 49(10):95-98.
  • Hossain, M. J., Faruque, M. R. I., Abdullah, S. M. S., Roslan, M. R., & Islam, M. T. (2017). A New Miniaturized Negative-Index Meta-Atom for Tri-Band Applications. Open Physics 15(1): 464-471.
  • Lee S, Kim K M, Park J, et al (2018) Pure rate effect on the concrete compressive strength in the split Hopkinson pressure bar test. International Journal of Impact Engineering, 113(7):191-202.
  • Panedpojaman P, Tonnayopas D (2018) Rebound hammer test to estimate compressive strength of heat exposed concrete. Construction & Building Materials, 172(1):387-395.
  • Wang Z, Zhou SJ (2017) Analysis of different conclusions on strength Test and Evaluation of structural solid concrete. Architecture Technology, 48(1):61-63.
  • Yang Y, Du K, Zhu NC (2017) Design and Application of Wireless temperature Control and Monitoring system for Mass concrete. Automation & Instrumentation, 13(6):121-123.
  • Yu, L., Yao, J. (2019). Establishment of Concrete Strength Evolution Model in Humid Environment. Ekoloji 28: 4015-4023.